fbpx

Bathroom Renovation Levisham

Reasons for Cracks in Bathroom Tiles and How to Fix Them

As time marches on, the cracks in bathroom tiles become inevitable.

With the correct fixes and correct aftercare, though, you ensure that your toilet look lasts for longer without the stress of costly repairs and water damage.

Firstly, we need to focus on why tiles cracking in the bathroom is such a big deal. Undoubtedly, cracked tiles after a remarkable bathroom renovation in Levisham can cause a variety of problems such as spaces allowing water to seep in, and damaging shower shiftings and wall structures as a result. It could also cause mould and bacteria problems, making your newly built bathroom completely unsanitary.

Why do tiles crack?
Cracks usually happen due to either improper installation, extreme temperature changes, tiles getting bludgeoned with too much weight, or something as simple as a heavy object dropping on them. If you have recently noticed a bunch of tiles having cracks in the bathroom, the best next step would be to try fixing them yourself through tried-and-tested DIY techniques or contact an expert to prevent the problem from getting worse.

Fixtures for the cracks: The How-tos
Once you have good knowledge about why tiles crack, it is finally time to think about the fixtures. In most cases, if you are lucky enough, tile cracks can be repaired without replacing an entire floor. To fix the minor hairline cracks, you can use an epoxy filler to cover the gaps. Larger, more visible tiles may, however, need a replacement.

Mentioned below are the steps to understand the process of fixing a large crack into the bathroom tile during or after a bathroom renovation in Levisham: –

  • Remove the grout from the edge of the affected tiles with a scraper.
  • Take an old towel and place it over the tile. Smack it in the centre with a hammer.
  • Remove the shards of broken tiles with a chisel and hammer and chip out the remaining pieces, if any.
  • Apply a small amount of tile adhesive to the underside of the tile.
  • Place the new tile carefully in the centre and gently press it. Once that is done, leave the adhesive to dry.
  • Finally, fill in the gaps and remove any excess grout. Wipe down to remove any grout residue and voila! You are done.

Remember that you can always hire a tile expert during or after your bathroom renovation in Levisham for a tile replacement or repair or you can also follow the outline above and do it yourself. It is important to keep your tiles from cracking. Make it a point to get high-quality tiles and use the best kind of adhesive to glue them to the floor. Consider the anti-structure membranes to avoid gaps and lastly, just have a daily on the tile cleanliness. Whether the impact of the fault comes from a careless installation process or low-quality materials, fixing the cracks in tiles should be done as quickly as possible before it leads to further damage

Get in Touch

Bathroom Remodelling Sydney Banner
Call Now 1800 077 071